Product Details:
Minimum Order Quantity | 1 Piece |
Color | White |
Voltage (Volt) | 230 |
Automation Grade | Automatic |
Power (Watt) | 550watts |
Dimension/Size | W300 X D219 X H670 mm |
Brand | Mitsubushi jet towel hand dryer |
Model Number | JT-SB216KSN-W-E |
Usage | Washroom |
Hand Drying | 10 Second |
Power Consumption | 1.24kw |
Voltage | 240V |
Weight | 11kg |
Mitsubishi engineers addressed the problems with traditional hand dryers by developing a new approach that uses two jets of high speed air to wipe water from both sides of hands. This approach reduced hand drying to just 10 seconds, eliminating paper towel waste and creating a hand dryer that finally works. Operation is easy, just insert your hands and remove them
Touchless Hygiene with Multiple Sensors:
The Jet Towel® employs two sensors, . upper and lower, to trigger the air stream, a feature unique to the Jet Towel®. The bottom sensor initiatives the air stream only after hands are fully inserted into the hand dryer, preventing water drops from blowing up hands as they enter the air stream and the upper sensors stops air flow once hands have left the dryer, saving on power.
Additional Information:
Product Details:
Dimension/Size | 240X270X200mm |
Drying Time | 10Sec |
RPM | 12000 |
Air Speed | 30m/s |
Blowing Volume | 270m3/h |
Power Supply | 230V/50Hz |
Power | 2500w |
Product Details:
Power (W) | 2200 |
Color | White |
Voltage (V) | 230 |
Sensor | Yes |
Brand | IEPL |
Body Material | ABS Plastis |
Voltage | 220V/50Hz |
RPM | 2800 |
Drying Time | Less than 20Sec |
Dimension | 240X240X230MM |
Continuous Work Time | 45sec-1min |
*Body Material : ABS Plastic(White)
*Power : 2200w
*Voltage : 220V/50Hz
*Water Splash Proof : IPX1
*Sensing Range : 20cm +/??? 5cm
*RPM : 2800
*Drying Time : 21Sec Airspeed:14m/sec
*Dimension : 240X240X230MMAdditional Information:
Product Details:
Body Material | ABS Plastic |
Power | 2200 W |
Voltage | 220V/50Hz |
Water Splash Proof | IPX1 |
Sensing Range | 20cm +/ 5cm |
RPM | 2800 |
Drying Time | 21Sec |
Air Speed | 14m/sec |
Dimension | 240X240X230 mm |
Product Details:
Minimum Order Quantity | 1 Piece |
Color | white |
Blowing Volume | 98m/sec |
Dry Hands Time | 6 seconds |
Water Splash Proof | Yes |
Voltage (V) | 230VOLTS |
Dimension/Size | 300X219X670MM |
Sensor | Yes |
Brand | MITSUBUSHI |
Air Speed (m per sec.) | 98 |
Noise Level (db) | 58 |
Blowing Volume (cube m per hr.) | 2.8 |
Automation Grade | Automatic |
Model Number | JT-SB216KSW |
Warranty | 7 YEARS |
Package Size | 300X219X670MM |
Voltage | 220-240V |
Frequency | 50-60Hz |
Drying Time | 6 SECONDS |
Usage | Washrooms |
Improved Service:
Evaluated highly for its sanitary characteristics, the Jet Towel T M is popular among facilities and shops alike. In addition to its abilit y to dr y hands com-plete l y in a mat te r of se conds a nd of fe r a cle a n sanitar y environment for customers, maintenance and upkeep costs are minimized for maximum cost efficiency. The result, enhanced customer service.
Designed for Installation between Sinks Can be aligned with the top of sink basins.
The ergonomic rectangular design matches well with most sink styles. Overall unit size was taken into consideration as well, ensuring that the top of the unit can be neatly aligned with the top of the sink basin. To ease congestion and prevent water spillage, the installa-tion of multiple units is recommended for places frequented by many people such as movie theaters and amusement facilities where many may people use dryers at the same time
Choose from a Variety of Colors Units blend easily into any décor.
In addition to highly popular White, a variety of new colors are now available. Two-toned Dark Gray and Silver, having a dark-gray body
and silver front panel; a chic Dark Gray that is ideal for tranquil restaurant atmospheres and the like; and stylish Silver for upper-class hotels and similar venues. The extended color line-up offers greater flexibility in color coordination and installation applications.
Product Details:
Color | Brushed or Shiny |
Voltage (V) | 220-250V/50Hz or 110-120V/60Hz |
Dimension/Size | W275 x D 205 x H 235MM |
Rated Power | 2300V |
Current | 11.0A/220V or 22.0A/110V |
Air Speed | 30M/S |
Water Splash Proof | IP x 1 |
Nozzle | 360deg revolving |
Material | Stainless Steel |
Additional Information:
Product Details:
Power (W) | 1800w |
Voltage (V) | 220V/50Hz |
Body Material | ABS Plastic |
Water Splash Proof | IPX1 |
Air Speed | 14m/s |
Continuous Work Time | 45sec1min |
Sensing Range | 12cm +/ 3cm |
RPM | 2800 |
Drying Time | Less than 20 Sec |
Dimension | 240X240X230 mm |
Additional Information:
Product Details:
Body Material | ABS Plastic(White) |
Dimension | 297X240X145mm |
Power | 1650W |
Voltage | 220V/50Hz |
Water Splash Proof | IPX1 |
Blowing Volume | 120m3/h |
Time Protection | 1min auto cut |
Sensing Range | 20cm +/ 5cm |
RPM | 3700 |
Drying Time | Less than 30 sec |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Power (W) | 2600 W |
Dimension/Size | 240X240X230mm |
Airflow | 300 m3/h |
Voltage | 230 V |
Frequency | 50/60 Hz |
Drying Time | Less than 20 Sec |
Sensing Range | 12cm +/- 3cm |
Product Details:
Material | Stainless Steel |
Voltage | 220V ~ /50 Hz |
Rated Power | 2500 Watt |
Current | 11.4 A |
Water Splash Proof | 1PX1 |
Blowing Volume | 270 Cubic Meter Per Hours |
Blowing Rate | 30m/s |
Dimension | 200X270X240 mm |
Drying Time | 10 Sec |
RPM | 6000 r/min |
Noise | 50 - 60 Db |
Sensing Range | 9+- 1cm |
Hot Temperature | 48 Degree C-59 Degree C |
Continuous Work Time | 60 Seconds |
Additional Information:
Product Details:
Power | 2500w |
Power Supply | 230V/50Hz |
Water Splash Proof | IPX1 |
Blowing Volume | 270m3/h |
Air Speed | 30m/s |
RPM | 12000 |
Drying Time | Less than 10Sec |
Dimension | 240X270X200 mm |
Additional Information:
Product Details:
Minimum Order Quantity | 5 Piece |
Brand | BOBRICK |
Voltage | 220-250 OR 110-120V |
Material | Stainless Steel |
Color | Brushed |
Air Velocity | 16M/SEC |
Design | SS 304 AISI GRADE |
Dimension/Size | 265X125X205 |
Sensor | Yes |
Rated | 1500V |
Current | 7.0A/220V or 13.9A/110V |
Dimension | W265 x D 125 x H 205 mm |
Durable, 22-gauge, type 304 satin-finish stainless steel cover with black plastic trim, automatic operation, dual air outlets.
115V AC, 15 Amp, 50/60 Hz, 1/25 Watts, Single Phase, cULus Listed.
208-240 AC, 6.8-7/8 Amp, 50/60 Hz, 1400-1900 Watts, Single Phase, cULus Listed, VDE approved and CE marked.Suitable for heavy traffic like airports,hospitals .
Additional Information:
Product Details:
Voltage | 220-250V/50Hz |
Rated Power | 1500V |
Current | 7.0A/220V |
Air Speed | 16M/S |
Water Splash Proof | IPX1 |
Dimensions | W265 x D 125 x H 205MM |
Material | Stainless Steel |
Product Details:
Minimum Order Quantity | 1 Piece |
Carton Contain | JET HAND DRYER |
Brand | IEPL |
Color | White |
Hand Dry Time Measurement | 20 SECONDS |
Airflow Rate | 85-138M/SECOND |
Noise Level | 60-80DB |
Air Speed | 300 to 350 km/h |
Drying Time | 10 to 15 seconds |
Material | ABS Body |
Power | 1650W |
Voltage | 230V 50/60Hz |
Additional Information:
Product Details:
Minimum Order Quantity | 25 Piece |
Power (W) | 1400W |
Color | Silver |
Voltage (V) | 220V |
Material | Steel |
Air Speed | 30m/s |
Additional Information:
Product Details:
Voltage | 220V/50Hz |
Power | 1650W |
Body Material | ABS Plastic |
Water Splash Proof | IPX1 |
Blowing Volume | 120m3/h |
Time Protection | 1min auto cut |
Sensing Range | 20cm +/- 5cm |
RPM | 3700 |
Drying Time | Less than 30 Sec |
Dimension | 297X240X145 mm |
Additional Information:
Product Details:
Material | Stainless Steel |
Color | White |
Power | 2500W |
Voltage | 220V |
Frequency | 50-60Hz |
Additional Information:
Product Details:
Power (W) | 1800W |
Material | Stainless Steel |
Power Supply | 220V/50Hz |
Water Splash Proof | IPX1 |
Air Speed | 60m/s |
Drying Time | Less than 10Sec |
Dimension | 295X171X325 mm |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Carton Contain | yes |
Color | White |
Brand | hand dryer |
Voltage | AC |
Air Speed | standard |
Description | ||||
Auto Hand Dryer HK-1800 ALU in Aluminium Body | ||||
L-265mm, W-240mm, D-208mm | ||||
Heater Wattage 1700W, | ||||
Motor RPM 2850 R.P.M, |
Additional Information:
Product Details:
Heating Power | 1800W |
Voltage | 110V-240V |
Motor Speed | 2000r/Min |
Air Speed | 80m/S |
Product Details:
Color | ivory |
Air Flow | 300 m3/h |
Frequency | 50/60Hz |
Sound Level | 60 dBA |
Product Details:
Minimum Order Quantity | 1 PIECE |
Color | White colour |
Voltage | 220V/50Hz |
Power | 100W |
Frequency (Hz) | 50Hz |
Automation Grade | Automatic |
Blowing Rate (m per s) | Single |
Motor Speed (rpm) | 2600 R.P.M |
Water Splash Proof | Yes |
Model Number | FD-1600 EA |
Current (A) | 8.2 A |
Hot Temp. (deg. Celsius) | 46.5? - 51? C |
Air Speed | 14.5m/sec. |
Weight (kg) | 2.3kg. |
Package Size | 250mm x 238mm x 230mm |
Input Power Supply | 220V/50Hz |
Sensor | 10 - 30 cm |
Brand | FAST DRIVE |
Material | ABS Body |
Rpm | 2600 R.P.M |
Description | ||||
Auto Hand Dryer HK-1600 EA - ABS Body | ||||
Body ABS Body in white color | ||||
Heater Wattage 1700 W 8.2 A | ||||
Motor Blower Wattage 100W | ||||
Blower Single | ||||
Dimension L-250mm, W-238mm, D-230mm | ||||
Net Weight 2.3kg. | ||||
Input Voltage 220V/50Hz | ||||
Air Volume 88m/h Air Speed 14.5m/sec. | ||||
Sound 63 3 db | ||||
Motor RPM 2600 R.P.M | ||||
Hot Air Temperature 46.5 - 51 C | ||||
Sensor Range 10 - 30 cm | ||||
Protection IP X1 |
Product Details:
Power (W) | 1300W |
Color | Silver |
Voltage | 220V~50Hz |
Product Details:
Material | SS |
Dimension/Size | 295x171x325 |
Color | Silver |
Product Details:
Voltage (Volt) | 240V |
Power (Watt) | 220V-50 - 60Hz |
Water Splash Proof | IPX1 |
Product Details:
Material | SS |
Color | Polished |
Power | 1800W |
Product Description :
Material : 304 Grade
Voltage : 220V~50Hz
Power Capacity : 1150W
Air Temperature : 65+15C
Motor Power : 500 W
Motor Rate : 25000 r/min
Air Speed : >60 m/s
Drying Time : Less than 15 secs
Water Splash Proof : 1PX1
Product size : 180 x 152 x 260 mm
Model :Iepl-eh26N
Additional Information: