Bollards

Product Details:

These models are automatic hydraulic traffic bollards. The cylinder is moved by a hydraulic unit located inside the cylinder. The
hydraulic release occurs automatically in the event of a power cut or, as an alternative, by direct action on the hydraulic unit. The
choice can be made by acting on the solenoid valve (see paragraph 10.1).

Features:

• LED Flashing lamp
• Crown
• Pressure switch
• Hydraulic unit lifting handle
• Internal junction box
• Hydraulic unit
• Cylinder
• Automatic lowering solenoid valve
• Cable routing hole
• External junction box
• Foundation anchors
• 2 magnetic contacts, up (N.C. and N.O. polarity)
• 4 stop points, up, with rotation-proof function
• Magnetic contact, down (N.C. polarity)
• 4 stop points, down

 

Facilities:

• Make sure that the place where the bollard is to be installed is not a cavity; if this is the case, partially protect
• the bollard with a drainage channel equipped with covering grid.
• Dig up to a depth of about 1.25 m (275 H600) or about 1.54 m (275 H800)
• The dig can be square and have a side of about 1 m (fig. 3). Otherwise it can be carried out using an earth
• drill with a diameter of 50 cm up to the depth mentioned above and widened in the last 30 cm giving a square
• shape of 1 m per side
• Fit the metallic pit as shown in the figure
• using the supplied rivets and secure it to the
• counter-frame with two screws and relevant
• bolts supplied.

 

Manual Operation:

The lowering of the bollard normally occurs by cutting the
mains power supply thanks to the solenoid valve located on the
hydraulic unit (see fig. 1 ref. h).
If however you need to lower the bollard by hand, you need to
act on the release device.

• Loosen the closing screw located on the bollard head
• Introduce a 5mm Allen key into the relevant hole.
• Turn counter-clockwise to lower the bollard

 

Positioning The Loops:

• Installation of a single bollard and two magnetic loops to detect vehicle transit.
• Installation of a single bollard and of a magnetic loop to protect the perimeter.
• The loops must be realized according to the instructions provided for the magnetic detector (control unit)

 

Maintenance:

Perform the following operations to have total access to the
hydraulic unit of the bollard in order to carry out maintenance
operations or due to faulty operation:

• lift the top head by unscrewing the four TORX screws (fig.13 ref. a)
• disconnect both plug-in connectors from the internal junction box (fig. 13 ref. b)
• loosen both screws securing the hydraulic unit to the cylinder (fig. 13 ref. c).
• completely lift the unit seizing it by its handle (fig. 13 ref.

Request
Callback

Product Details:

The J 275H Automatic concealed traffi c bollard is advisable when many transits are expected.It can be activated automatically by commands given by authorised persons (cards, remote-controls, etc.) or by using automatic commands operated at set times (timer).
The J 275H Bollard has a single-effect hydraulic activation.

Features:

• Does not disfi gure the characteristics of the environment because of its a mobile
• concealed element with minimal environmental impact
• Ensures greater protection of pedestrian areas in the town centre
• Allows access to authorised vehicles only
• Reduces and optimises the use of human resources in access control activities
• customisable colour selection for blending in with the urban context
• Activity can be signaled by built-in buzzer and led outer ring, according to its position
• full range accessories is availability
• Its function is to deter

Request
Callback

Product Details:

An excellent quality range of Anti Terror Automatic Bollard is offered from our end. The Anti Terror Automatic Bollard we offer is widely demanded for their hassle free performance. Offered products are made accordingly as per the requirements of the clients. Besides, one can get these products in committed time frame. Offered products are suitable for various applications and known for rendering hassle free performance.

 

Features:

• Cost effective
• Durable
• Reliable

Request
Callback

Product Details:

Owing to years of experience, we are presenting a quality assured assortment of Semi Automatic Bollard. The Semi Automatic Bollard we offer is widely demanded amongst the clients for its sturdiness and reliability. Offered products are made by using quality material which is sourced from reliable vendors of the industry. Offered products are made by using high grade material which is sourced from reliable sources.

 

Features:

• Easy installation
• Safe use
• Quality assured

Request
Callback

Product Details:

We are presenting a quality approved assortment of Automatic Bollard. The Automatic Bollard we offer is recommended amongst the clients for its durability and reliability. These products are available in the market at industry leading prices. Besides, one can get these products in committed time frame. One can get these products in the market at industry leading prices. Moreover, our products are safe to use.

 

Features:

• Quality approved
• Reliable
• Safe use

Request
Callback

Product Details:

An excellent quality range of Fixed Bollard is offered from our end. The Fixed Bollard we offer is widely demanded for their sturdiness and reliability. These products are safe to use. These products are available in committed time frame. Moreover, offered products are available in various sizes and specifications. One can avail from us a quality assured range of Fixed Bollard. These products are tested for their quality before being introduced in the market.

 

Features:

• Quality assured
• Durable
• Safe use

Request
Callback